|
|||||
- 6,4" colour touch-screen TFT-LCD with central rotary button
- dialogue handling at the screen
- self-test and control of the single components in the standby mode
- automatic leakage test
- electronic control of the adjusted gas dosage
- electronic supervision of the pressure gas supply with display and alarm function for lower deviation in pressure
- compensation of variations in pressure supply
- detection of the system compliance
- dynamic compliance compensation
- wide adjustment range from 200 ml to 11 litres
- precise resolution and display of the scale in 20 ml steps
- automatic switchover of the scale at higher flow values
- automatic fresh gas dosing for low flow operation
- low-pressure-technology from 2 bar pressure
- display of the measured values as curves and numeric values
- configurable basic adjustments, specific for each ventilation mode
- default parameters can be defined
- integrated monitor for volume, pressure, O2, anaesthetic agents, N2O, CO2
- electronic PEEP
- for neonatal, paediatric and adult application
- error state and service information logging
- best optic and acoustic visualising of the alarms
- single vaporizer holding for different vaporizers (Halothane, Enflurane, Isoflurane, Sevoflurane, Desflurane)
- compact circle system, CO2-absorber canister is exchangeable during operation without any leakage
- RS232 interface for connection to electronic anaesthesia documentation and clinical IT-network
Security system:
- electronic O2-deficiency detection
- electronic N2O-blockage
- O2-emergency dosage (min. 4 L/min O2 flow in case of total failure)
- emergency dosage for gas supply failure: failure AIR:
100% O2, failure N2O: 100% O2, failure O2: 100% AIR
- automatic check for correct covering of the single gas supply channels every time the device is switched on
- operation is guaranteed for at least 30 minutes at power supply failure by an internal rechargeable battery
Ventilation parameters:
- CMV (volume controlled ventilation)
- PCV (pressure controlled ventilation)
- MAN./SPONT. (manual, spontaneous), spontaneous ventilation with apnea control
- SIMV (synchronous intermittend mandatory ventilation)
- MMV (mandatory minute ventilation)
- ASB (pressure support ventilation)|
Technical Specifications: |
||
| Ventilation parameters: | ||
|
CMV-Mode:
|
|
|
| Tidal volume: | 20 - 1500 ml | |
| Frequency: | 6 - 60 min-1 | |
| I:E-ratio: | 2:1-1:4 at Ti 0,3 – 10 s | |
| Pressure limitation PMAX: | (PEEP +5) to 80 hPa | |
| PCV-Mode: | ||
| Inspiratory flow: | 10 - 80 L | |
| Frequency: | 6 - 60 min-1 | |
| I:E-ratio: | 2:1-1:4 at Ti 0,3 – 10 s | |
| Pressure limitation PMAX: | (PEEP +5) to 80 hPa | |
| SIMV-Mode (Option): | ||
| Tidal volume: | 20 - 1500 ml | |
| Frequency: | 4 - 60 min-1 | |
| I:E-ratio: | 2:1-1:4 at Ti 0,3 – 10 s | |
| Pressure limitation PMAX: | (PEEP +5) to 80 hPa | |
| Flow trigger: | 3 L/min | |
| MMV-Mode (Option): | in preparation | |
| Frequency: | 4 - 60 min-1 | |
| I:E-ratio: | 2:1-1:4 at Ti 0,3 – 10 s | |
| Pressure limitation PMAX: | (PEEP +5) to 80 hPa | |
| Flow trigger: | 3 L/min | |
| ASB-Mode (Option): | in preparation | |
| Neonatal-Mode (Option): | in preparation | |
| Tidal volume: | 5 - 350 ml | |
| Frequency: | 15 - 150 min-1 | |
| for all ventilation modes: | ||
| PEEP (integrated): | 0 - 20 hPa | |
| Inspiratory pause: | 0 - 50 % Ti | |
|
Monitoring: |
||
|
|
|
|
| Pressure measurement: | ||
| Measuring range: | -10 - 90 hPa | |
| Accuracy: | ± 4% or ± 1hPa | |
| Resolution: | 1 hPa | |
| Volume measurement: | ||
| Measures: | tidal volume, minute volume, | |
| frequency | ||
| Tidal volume: | 0 - 2000 ml | |
| Accuracy: | ± 8% | |
| Minute volume: | 0 - 99 l/min | |
| Accuracy: | ± 8% | |
| Frequency: | 3 - 150 min-1 | |
| Accuracy: | ± 1 min-1 | |
| Resolution: | 1 min-1 | |
| Anaesthetic agent measurement (option): | with/without automatic agent identification | |
| Anaesthetic agents: | Halothane, Enflurane, Isoflurane, Sevoflurane, Desflurane | |
| Measuring ranges: | HAL, ISO: 0 - 8.5 Vol%, ENF, SEV: 0 - 10 Vol%, DES: 0 - 22 Vol% |
|
| Accuracy: | ± (0.15 Vol% + 15% rel.) |
|
| Resolution: | 0.1 Vol% | |
| MAC calculation: | minimum alveolar concentration | |
| N2O-measurement (option): | ||
| Measuring range: | 0 - 100 Vol% | |
| Accuracy: | ± (2 Vol% + 8% rel.) | |
| Resolution: | 1 Vol% | |
| CO2-measurement (option): | ||
| Measuring range: | 0 - 10 Vol% | |
| Accuracy: | ± 0.5 Vol% or ± 12% rel. | |
| Resolution: | 0.1 Vol% | |
| Oxygen measurement Galvanic Cell (option): | ||
| Measuring principle: | Galvanic Cell | |
| Measuring range: | 0 - 100 Vol% | |
| Accuracy: | ± 1 Vol% or ± 2% rel. | |
| Resolution: | 1 Vol% | |
| T90: | approx. 14 seconds | |
| Sensor life time: | approx. 1-4 years, depending on the measured oxygen concentration | |
| Oxygen measurement paramagnetic (option): | ||
| Measuring principle: | paramagnetic | |
| Measuring range: | 0 - 100 Vol% | |
| Accuracy: | ± 1 Vol% or ± 2% rel. | |
| Resolution: | 1 Vol% | |
| T90: | 500 ms | |
| Note: | only available with gas bench for anaesthetic agents and/or CO2 | |
| Alarms: |
For all measurements lower and upper alarm limits are adjustable (inspiratory and expiratory values for anaesthetic agents, N2O, CO2, paramagnetic O2-measurement, inspiratory value only for O2-measurement by galvanic cell). |
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||